Metal Valve, Removing And Installing, Version 1: Installing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Clean the valve hole.

-- Insert the metal valve into the valve hole, attach the washer and tighten the union nut to tightening specification.

-- Secure the valve using the 2 mm pin against turning.

Fig 1: Securing Against Turning With Counter Hold

Courtesy of AUDI OF AMERICA, LLC

-- Install the tire pressure monitoring sensor.