Shock Absorber, Servicing

Special tools and workshop equipment required 

• Shock Absorber Set:T10001 

  Courtesy of AUDI OF AMERICA, LLC

• Commercially available ring socket wrench, such as >>Hazet 6630c-21<<

Shock Absorber Mount Threaded Connection, Loosening and Tightening

Courtesy of AUDI OF AMERICA, LLC

1. Commercially available ring socket wrench, such as >>Hazet 6630c-21<<
2. Extension w. Counter Holder 2:T10001/10 
3. Ratchet (commercially available)
4. Torque Wrench
5. Socket:T10001/1 
6. Shock Absorber Mount

-- Slide the protective pipe -1- onto the shock absorber mount -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Install and tighten the cable tie -3-.

• The closure -arrow- of the cable tie must be in area -a-.

Tightening Specification

• Refer to OVERVIEW - SHOCK ABSORBER