Overview - Stabilizer Bar
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Lower Transverse Link
- Nut
- 20 Nm +180°
- Replace after removing
- Coupling Rod
- Removing and Installing. Refer to COUPLING ROD, REMOVING AND INSTALLING .
- Bolt
- 20 Nm +90°
- Replace after removing
- Install evenly
- Bolt
- Replace after removing
- Nut
- 55 Nm
- Counterhold at connecting link socket head when tightening
- Stabilizer Bar
- With rubber bushings
- Removing and Installing. Refer to STABILIZER BAR, REMOVING AND INSTALLING .
- Subframe