Overview - Axle Beam
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- Bolts
- 50 Nm +45°
- Replace after removing
- Bolt
- 70 Nm +360°
- Replace after removing
- Tighten in the curb weight position. Refer to VEHICLES WITH COIL SPRINGS, CHECKING THE CURB WEIGHT POSITION FOR AXLE ALIGNMENT .
- Axle Beam
- Removing and Installing. Refer to REAR AXLE, REMOVING AND INSTALLING, TORSION BEAM AXLE .
- Bonded Rubber Bushing
- Note the installation position
- Replacing. Refer to AXLE BEAM BONDED RUBBER BUSHING, REPLACING .
- Mounting Bracket