Center Stone Chip Protection, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Release the right and left rear catches -1- using a flat-head screwdriver.
-- Release the right and left front catches -2- using a flat-head screwdriver.
-- Pivot the stone chip protection -3- slightly downward.
-- Remove the stone chip protection forward from the axle beam in direction of -arrows-.