ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, LHD VEHICLES: Notes
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- If the ABS Control Module -J104- is faulty, it can be replaced separately.
- If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Open Ring Spanner Insert - AF 11mm:V.A.G 1410/6
- Torque Wrench - Universal Joint :V.A.G 1410/7
- Brake Pedal Actuator:V.A.G 1869/2
.
- Collection bottle from the Bleeding Equipment:VAS 6860
or Brake Charger/Bleeder Unit:VAS 5234
- Wrench - Brake Bleeder Set:VAS 5519
- Plugs from the Repair Kit:1H0 698 311 A
: M10 -item 1- and M12 -item 2-
- Plugs from the Assembly Part Set:5Q0 698 311
: M10 -item 1- and M12 -item 2-
- Safety Gloves