Tie Rod End, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the tie rod end -1- on the tie rod -2-.
- The dimension -a- must be the same on the right and left tie rod end.
- The maximum permitted difference between the right and left < 2 mm.
Install in reverse order of removal. Note the following:
-- Perform a vehicle alignment. Refer to AXLE ALIGNMENT .