Coupling Rod, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the nut -arrow- of the coupling rod -1- on the suspension strut by counterholding with a four-point socket on the threaded pin if necessary.
-- Remove the coupling rod from the suspension strut.
-- Remove the nut -1- from the coupling rod -3- on the stabilizer bar -2- by counterholding with a four-point socket on the threaded pin if necessary.
-- Remove the coupling rod from the stabilizer bar.