Bonded Rubber Bushing, Lubricating:
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The kidney-shaped area -1- of the bonded rubber bushing must be lubricated.
-- Apply Grease evenly using a brush from above.
- The contact surfaces to the control arm must not come in contact with grease.
Required quantity of grease
- For both kidney-shaped areas apply a fat thread -a- approximately 10 mm long.
-- Apply half the quantity of grease approximately 5 mm in each kidney-shaped area.
-- Overview table for when an axle alignment is needed. Refer to NEED FOR AXLE ALIGNMENT, EVALUATING .