Outer CV Joint, Checking: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the ball cage with the ball hub in the joint housing.
- The ball cage must be inserted on the correct side.
-- Press in the opposite facing balls one after the other, and the old ball hub position to the ball cage and to the joint housing must be replicated.
-- Install the new circlip in the shaft.