Measurement Preparations For Calibrating/Aligning The Driver Assist Systems, Quick Access Mode

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Select the "quick access" mode on the wheel alignment computer when the driver assistance systems need to be calibrated/aligned.

Connect the battery charger for the battery support mode. Refer to BATTERY, CHARGING .
Position the wheels so that they are straight.
Check the DTC memory before starting a calibration/alignment. Fix all displayed entries.
Vehicle accurately aligned, suspension bounced and rocked several times
The vehicle exterior lamps are off.
All the vehicle doors are closed.