Knock Sensor 1 -G61-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Engine Temperature Control Actuator -N493-. Refer to Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Free up the wire -1- for the Knock Sensor 1 -G61- to do so release the catch -arrow- from the bracket -2-.
-- Remove the bolt -arrow- and then the Knock Sensor 1 -G61-.