Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Valve Seal:3364
- Seal Installer - Valve Stem:3365
for the valve stem seal with a single sealing lip. Refer to Figure.
- Fitting Tool:T40376/1
for the valve stem seal with a double sealing lip. Refer to Figure.
- Valve Keeper Tool Kit:VAS 5161A
with the Guide Plate:VAS 5161A/44
- Engine and Gearbox Bracket:VAS 6095A
- Cylinder Head Tensioning Device:VAS 6419
- Assembly Tool :T40452