Sliding Bar Ball, Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
Installing
CAUTION:
Risk of injuring the eyes due to the sliding bar ball springing out.
- Wear protective eyewear.
-- Insert the spring -1- in the camshaft.
-- Place the ball -2- on the spring in the camshaft.
-- Push the ball and spring downward in the -direction of the arrow A- using the Camshaft Spacer:T40191/1 and hold in place.
-- Push the sliding bar -3- in the -direction of arrow B-.