Cam Adjustment Actuator, Removing And Installing: Notes
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Cam Adjustment Actuator 1 -F366- : free up the wires and slightly push to the side.
-- Disconnect the connector -2-.
-- Remove the bolt -1- and the cam adjustment actuator.