Vibration Damper Seal, Replacing: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
-- Remove the seal -arrow- with the Seal Installer - Crankshaft:T40274 .
-- Clean the contact and sealing surface.
-- Push the seal -arrow- on the Seal Installer - Crankshaft:T10354 .
- The closed side of the seal points to the Seal Installer - Crankshaft:T10354 .
-- Push the seal -arrow- with the Seal Installer - Crankshaft:T10354 on the Vibration Damper Assembly Tool - Tensioning Pins:T10531/6 -item 1- and place on the lower timing chain cover.
-- Also screw in the Press Piece - Gearbox:T10375 and tighten the Vibration Damper Assembly Tool - Knurled Nut:T10531/4 .
-- Drive the seal in all the way using the Seal Installer - Crankshaft:T10354 .