Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Disconnect the connector -1-.
-- Press both of the release buttons -2 to 3- and remove the lines from the Secondary Air Injection Pump Motor -V101-.
-- Remove the nuts -arrows- and remove the Secondary Air Injection Pump Motor -V101- with the bracket.