Muffler, Removing And Installing, AUDI A3 From My 2021/Q2 From My 2016/AUDI Q3 From My 2019/TT From My 2015: Removing
-- Remove the rear tunnel brace. Refer to OVERVIEW - UNDERBODY BRACING .
Risk of injury due to flying soot particles.
Irritation and injury to skin and eyes possible.
- Wear protective eyewear.
- Wear safety gloves.
-- Loosen the clamping sleeve -arrow- and push it toward the rear.
-- Tie up the catalytic converter.
Audi A3 from MY 2021 with FWD/TT from MY 2015:
-- Disengage the mounting -2- from the exhaust system rear section.
Risk of accident due to the heavy weight of the muffler.
- A second technician is required for the following work steps.
-- Remove the bolts -3- left and right as well as bolt -4- and remove the muffler -1-.
Audi A3 from MY 2021/Q2 from MY 2016 with AWD
-- Disengage the mounting -3- from the exhaust system rear section.
Risk of accident due to the heavy weight of the muffler.
- A second technician is required for the following work steps.
-- Remove the bolts -1 and 2- and then remove the muffler.
Audi Q3 from MY 2019 with AWD:
Risk of accident due to the heavy weight of the muffler.
- A second technician is required for the following work steps.
-- Remove the bolts -arrows- and then remove the muffler.