LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Crankshaft, Cylinder Block) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Sealing Flange, Removing And Installing, Transmission Side >> Removing

Sealing Flange, Removing And Installing, Transmission Side: Removing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the intermediate plate. Refer to Figure.

-- Remove the bolts -1 through 8-.

Fig 1: Crankshaft Sealing Flange (Eight Bolts) Tightening Sequence
GWWA13-10509Courtesy of AUDI OF AMERICA, LLC

-- Loosen the sealing flange from the bond.

-- Cover open engine components.