Vibration Damper, Removing And Installing, Vehicle With Starter Generator: Notes
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.
Tool Preparation
-- Remove the bolts -arrows- and remove the adapter -1- from the Vibration Damper Assembly Tool - Counterhold Tool:T10531/1 .