Sensor Wheel, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Always replace the sensor wheel -2- each time the bolts -1- are loosened.
- After tightening a second time, the attachment point of the countersunk bolts in the sensor wheel is so deformed that the bolt heads are at the crankshaft -3- -arrows- and the sensor wheel is loose under the bolts.
- Installing the sensor wheel is only possible in one position - the bores are offset.
-- Install the crankshaft. Refer to CRANKSHAFT, REMOVING AND INSTALLING .