Balance Shaft, Removing And Installing, Intake Side: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The engine is removed and secured to the engine/transmission holder. Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .
-- Remove the coolant pump toothed belt. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .
-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .
- Pay attention to the direction or rotation: the bolts for the drive wheel have left-hand threads - there is a risk of damaging the threads.
-- Remove the bolt -2-.
-- Remove the drive wheel -1- for the coolant pump toothed belt.
-- Remove the bolt -1- and the intermediate shaft sprocket.
-- Remove the mounting pin -1-.
-- Remove the bolt -2- and the intake side balance shaft. If necessary, slightly rotate the balance shaft.