Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- Press the control rod onto the ball pin until it engages audibly.
Refer to the appropriate Service Information.
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Fill with coolant. Refer to COOLANT, FILLING USING Cooling System Charge Kit:VAS 6096 [DNNA, DNNB, DNND, DNVB] .