Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes

Special tools and workshop equipment required 

• Puller - Valve Seal:3364 
  Fig 1: Identifying Puller - Valve 3364

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Valve Stem:3365  for the valve stem seal with a single sealing lip. Refer to Figure.
  Fig 2: Identifying Seal Installer - Valve Stem 3365

  Courtesy of AUDI OF AMERICA, LLC
• Fitting Tool:T40376/1  for the valve stem seal with a double sealing lip. Refer to Figure.
  Fig 3: Exhaust side: Fitting Tool

  Courtesy of AUDI OF AMERICA, LLC
• Valve Keeper Tool Kit:VAS5161A  with Guide Plate:VAS5161/19C 
  Fig 4: Valve Keeper Tool Kit VAS5161A

  Courtesy of AUDI OF AMERICA, LLC
• Engine and Transmission Holder:VAS6095A 
  Fig 5: Engine And Transmission Holder

  Courtesy of AUDI OF AMERICA, LLC
• Cylinder Head Tensioning Device:VAS6419 
  Fig 6: Cylinder Head Tensioning Device

  Courtesy of AUDI OF AMERICA, LLC
• Assembly Tool:T40452  , not illustrated