Lower Timing Chain Cover, Replacing: Removing

• Engine oil drained. Refer to ENGINE OIL .

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Remove the engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .

-- Free up the clip -2- for the wiring harness.

Fig 1: Identifying Oil Dipstick Guide Tube

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Unclip the oil dipstick tube from the upper timing chain cover in the direction of -arrow-.

-- Disconnect the connector -1- for the Oil Pressure Regulation Valve -N428-.

Fig 2: Identifying Oil Pressure Regulation Valve

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 15-.

Fig 3: 15 Bolts Timing Chain Cover Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the lower timing chain cover from the bonding.