Ribbed Belt, Removing And Installing: Removing
Audi Q2 from MY 2016:
-- Remove the washer fluid reservoir filler neck. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .
Continuation for All Vehicles:
CAUTION:
There is a risk of injury if the radiator fan turns on by itself.
- When performing procedures near the radiator maintain a distance to the radiator.
CAUTION:
Risk of destroying a used ribbed belt by reversing the running direction.
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- Turn the tensioner clockwise -arrow- to release the tension on the ribbed belt.
-- Secure the tensioner using the Locking Pin:T10060A .
-- Remove the ribbed belt.