Engine Support, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Replace bolts that were tightened with an additional turn after removing them.

-- Install the bolt -2- before installing the engine support in the engine support hole.

-- Position the engine support and bolts -1, 2 and 3- first by hand all the way, then tighten to the specified tightening specification and sequence.

-- Install the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Install the oil filter element. Refer to ENGINE OIL .

-- Install the windshield washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .