Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the => Parts Information.

-- Press the control rod onto the ball pin until it engages audibly.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, FILLING USING Cooling System Charge Kit:VAS6096 [DNFB, DNPA, DNFD, DNFC, DSFA] .