Wheel, Installing
Installing
-- Clean the contact surface of the rims to the wheel bearing unit.
-- Clean the contact surface to the rim.
-- Raise the vehicle.
-- Position the wheel.
-- Insert the wheel bolts -arrows-.
Vehicles with wheel bolt lock
-- Install the wheel bolt lock.
Continuation for all vehicles
-- Lower the vehicle.
-- Tighten the wheel bolts -arrows-.
Vehicles with wheel hubcap
-- Install the wheel hubcap.
Vehicles with wheel bolt cap
-- Install the wheel bolt cap.
Continuation for all vehicles
Tightening Specifications
- Refer to WHEEL BOLTS TIGHTENING SPECIFICATION .