Inner Thorax Airbag, Removing And Installing: Removing

The thorax airbag with Driver Side Front Center Airbag Igniter for Occupant Contact Protection - N737- will be called the thorax airbag in the information that follows.

-- Switch off the ignition and electrical equipment.

-- Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.

-- Remove the cover with the cushion at the backrest. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .

-- Release the connector lock -2- in the -direction of the arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3-.

-- Remove the bolts -5-.

-- Remove the clip -4- using the Release Tool: T10236  .

-- Remove the bolt -8-.

-- Guide out the thorax airbag -1- from the rear seat backrest and remove.