Seat Position Sensor, Removing And Installing: Removing

-- Remove the front seat and mount on the seat repair bracket. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Open the corrugated tube, remove the wire for the driver seat position sensor with the connector and free up.

-- Remove the cable ties or cable clips for the wire on the seat pan lower frame.

-- Remove the bolt -3-, unclip the seat position sensor -1- from the seat pan lower frame -3- and disengage it -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wire to the seat belt latch -3- and disconnect.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2- for the passenger occupant detection sensor -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat position sensor with the wires.