Front Passenger Airbag Unit With Igniter, Removing And Installing: Removing
-- Position the front passenger seat as far back as possible.
-- Switch off the ignition and electrical equipment.
-- Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.
-- Remove the glove compartment. Refer to Glove Compartment, Removing and Installing .
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Release the connector lock -1-.
-- Disconnect the connectors -2-.
Conditions
- Secure the airbag unit -1- so that it does not fall down.
-- Remove the bolts -A arrows-.
-- Remove the bolts -B arrows-.
-- Remove the airbag unit -2- downward.