Airbag Connector, Replacing: Removing
The airbag unit with Driver Airbag Igniter - N95- will be called the airbag unit with igniter in the information that follows.
-- Remove the airbag unit with igniter. Refer to Airbag Unit with Igniter, Removing and Installing .
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Release the connector lock -2- for the connector -1- with a small flat-head screwdriver -arrow-.
-- Disconnect the connectors -1 and 3- from the Driver Airbag Igniter -N95- and Driver Airbag Release Valve Igniter -N490-.
-- Disconnect the connectors -4- by releasing the retaining tab.
-- Disengage and remove the wiring harness -2- at the brackets.