Front Airbag And Passenger Side Front Airbag Crash Sensor G190/G284, Removing And Installing: Removing
-- Switch off the ignition and electrical equipment.
-- Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.
-- Open the hood.
CAUTION:
Pyrotechnical components can deploy unintentionally.
Risk of injury.
- Discharge the static electricity: quickly touch the door striker.
-- Remove the bolt -3-.
-- Remove the crash sensor -1-.
-- Disconnect the connector -2-.
-- To do this, pull the connector lock -2- out and press it down in the -direction of the arrow-.