Overview - Underbody Trim Panels

Courtesy of AUDI OF AMERICA, LLC

Front Underbody Panel
- Refer to Front Underbody Trim Panel, Removing and Installing .
Bolt
- Quantity: 9
- 2 Nm
Clip
- Quantity: 4
High-Voltage Battery Impact Guard
- Refer to High-Voltage Battery Impact Guard, Removing and Installing .
Bolt
- Repair stages. Refer to the appropriate Electronic Parts Information.
- Quantity: 35
- Replace after removing
- Production condition and repair bolt stage 28 Nm
- Repair bolt stage 15 Nm
Nut
- Quantity: 22
- 8 Nm +30°
Expanding Nut
- Quantity: 5
- Replace after removing
Bolt
- Quantity: 5
- 2 Nm
Side Underbody Trim Panel/Side Impact Guard
- Depending on the equipment/version
- Refer to Side Underbody Trim Panel, Removing and Installing .
Cover
- Left and right
- Refer to Center Underbody Trim Panel, Removing and Installing .
Impact Guard
- Design depending on the model
- Refer to Impact Guard, Removing and Installing .
Bolt
- Quantity depending on the model
- Quantity: 3 or 4
- 20 Nm
Rear Underbody Trim Panel
- Design depending on the model
- Refer to Rear Underbody Trim Panel, Removing and Installing .
Bolt
- Quantity depending on the model
- Quantity: 5 or 9
- 2 Nm
Center Underbody Trim Panel
- Refer to Center Underbody Trim Panel, Removing and Installing .
Nut
- Quantity: 9
- 2 Nm
Expanding Nut
- Quantity: 2
Rear Center Underbody Trim Panel
- Refer to Rear Center Underbody Trim Panel, Removing and Installing .
Clip
- Quantity: 3
Bolt
- Quantity: 2
- 8 Nm
Bolt
- Quantity: 5
- 2 Nm
Side Underbody Trim Panel/Side Impact Guard
- Depending on the equipment/version
- Refer to Side Underbody Trim Panel, Removing and Installing .
Bolt
- Quantity: 5
- 2 Nm
Expanding Nut
- Quantity: 5
- Replace after removing
Bolt
- Quantity: 4
- Refer to OVERVIEW - INSTALLED HIGH-VOLTAGE BATTERY, 82 KWH .