Towing Recognition Control Module J345, Removing And Installing: Removing

If the control module is replaced, the test plan to replace the control module must be performed.

-- Perform the "Control module, replacing" function with the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the luggage compartment left trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Disconnect the connectors -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -2-.

-- Remove the bolt -3-.

-- Remove the Towing Recognition Control Module -J345- -1-.