LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> Q4 e-tron Prestige >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Equipment >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Sill Panel Trim, Removing And Installing >> Removing

Sill Panel Trim, Removing And Installing: Removing

-- Remove the inner door seal in the area of the sill panel trim from the body.

Sill Panel Trim Illuminated

-- Remove the front sill panel. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA66-12187Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness -2-.

Continuation for all vehicles

-- Carefully warm up the sill panel trim -1- using the Wiring Harness Repair Set - Hot Air Blower:VAS1978/14A  .

GWWA66-11644Courtesy of AUDI OF AMERICA, LLC

-- Carefully pry out the sill panel trim -1- from the side sill -arrow- using the Trim Removal Wedge:3409  . Do not damage the paint coat while doing so.