Roof Grab Handle, Removing And Installing: Removing
-- Fold down the roof grab handle -1-.
-- Unclip the caps -2- using a commercially available plastic wedge.
-- Fold the roof grab handle down -1- and hold it.
-- Press the Release Tool:T10518A -2- in the -direction of the arrow- until the clip -3- releases.
-- Pull the release tool -2- using the roof grab handle -1- opposite the -direction of the arrow-.
-- Repeat the procedure for the other clip -3- while holding the roof grab handle -1- with tension so that the clip -3- does not engage again.
-- Remove the roof grab handle -1-.