Clutch Housing, Servicing: Notes

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Puller - Grease Cap :VW637/2 
• Hot Air Blower :V.A.G 1416  or Wiring Harness Repair Set - Hot Air Blower : VAS 1978/14A 
• Bearing Installer - Wheel Bearing :3144 
• Seal Installer - Gearbox :3295 
• Puller - Crankshaft/Power Steering Seal :T20143 
• Counterhold Tool :T10114 

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Bearing Installer - Wheel Bearing/Ball Bearing :3074 
• Bearing/Bushing Installer - Multiple Use :VW295 
• Press Piece - Output Shaft Gear/Final Drive Gear :3002 
• Subframe Bushing Tool Kit :3301 
• Press Piece - Trailing Arm :2010 
• Inductive Heater :VAS 6414 

Special tools and workshop equipment required 

• Puller (Kukko 18/2) :VAS 251 419 

  Courtesy of AUDI OF AMERICA, LLC

• Internal Puller :VAS 251 615 

  Courtesy of AUDI OF AMERICA, LLC

• Counter Support :VAS 251 623 
  Fig 1: Counter Support

  Courtesy of AUDI OF AMERICA, LLC
• Circlip Pliers :VAS 211 009