Overview - Transmission Fluid Circuit

Fig 1: Exploded View of ATF Cooler, ATF Line

Courtesy of AUDI OF AMERICA, LLC

Plug
- For the ATF check and fill hole
- Replace after removing
- 8 Nm +30°
Plug
- For the transmission fluid inspection and fill hole
- Replace after removing
- 35 Nm
Transmission Fluid Pump (MTF Pump)
- With seal welded on
- Must be removed to drain the transmission fluid (MTF)
- Replace the transmission fluid pump if the seal is damaged.
- Removing and installing. Refer to TRANSMISSION FLUID PUMP, REMOVING AND INSTALLING .
Bolt
- Replace after removing
- 3 Nm +90°
Drain Plug
- For the ATF
- Replace after removing
- 35 Nm