Tunnel CROSSMEMBER, Removing And Installing: Removing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- 4-cylinder vehicles TDI engine: remove the center front underbody trim panel. Refer to the appropriate service information .

-- Vehicles with 6-cylinder TFSI engine: remove the left front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and nut -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the crossbrace end panel -1-.

-- Mount the :T10337  on the :VAS6931  and attach it under the transmission.

Courtesy of AUDI OF AMERICA, LLC

-- Raise the transmission slightly.

-- If installed, remove the connectors -2 and 3- from the bracket and free up the wires.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the nuts -1- and remove the tunnel crossmember.

Courtesy of AUDI OF AMERICA, LLC