Overview - Assembly Mounts

Fig 1: Exploded View Of Dual Clutch Transmission Mount, Version 2

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 70 Nm for FWD vehicles (M10x40 10.9)
Tunnel Crossmember
- Removing and installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
Bolt
- 20 Nm +90°
- Replace after removing
- Only remove if the transmission mount must be separated from the transmission support
Stop
- For the transmission mount
Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Nut
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
Bolt
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
Transmission Support
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- 40 Nm
Nut
- 20 Nm