Drain and Plug

Fig 1: Exploded View of ATF Cooler, ATF Line

Courtesy of AUDI OF AMERICA, LLC

Plugs
- Replace after removing
- Tighten all the way
- For the ATF check and fill hole
Plug
- Tightening specification -item ) Plug.
- For the transmission fluid inspection and fill hole
Transmission Fluid Pump (MTF Pump)
- Must be removed for draining the transmission fluid (MTF). Refer to TRANSMISSION FLUID PUMP, REMOVING AND INSTALLING .
Bolt
- Tightening specification -item ) Bolt.
Plug/Plugs
- Replace after removing
- Tighten all the way
- For the ATF