Clutch Cover, Replacing

• The piston for the slave cylinder must be transferred from the removed clutch cover.
• The bleeder valve must always be replaced.
• Coat the seals and valves with ATF.

-- Carefully press out of the old clutch cover -1- from the piston -2- with compressed air via the hole -A-.

Courtesy of AUDI OF AMERICA, LLC

-- Press in the new valve -1- until it contacts in the clutch cover -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Press in the piston -3- with the new seals -4-.

-- Install bearing A. Refer to DRIVE AXLE BEARING, REPLACING .