Air Suspension System, Filling And Bleeding
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Bleeding
-- If the air suspension system is bled, select the "Air Suspension System, Bleeding" program. Refer to DIAGNOSTIC ENTRIES .
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
Filling
CAUTION:
Risk of destroying the rear air springs due to incorrect handling when filling.
- Guide empty or newly installed air springs on the rear axle during the filling procedure.
-- To fill, proceed in the same way under "Air Suspension System, Filling". Refer to DIAGNOSTIC ENTRIES .