Fan Shroud, Removing And Installing, 3.0L Engine: Removing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the right front wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Remove the charge air cooler. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .

-- Remove the left and right headlamp cover -1- upward in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the lower air duct -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the left and right catches in direction of -arrows- and remove the retaining pin -1- for the radiator upward.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers in direction of -arrows- and remove the upper air duct -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Place the Shop Crane - Drip Tray :VAS6208  underneath.

Courtesy of AUDI OF AMERICA, LLC

-- Pry up the clamp -2- and remove the coolant hose from the lower right of the radiator.

-- Release the catches -2- and remove the air duct -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Pry up the clamp -arrow- and support the left lower plug in the radiator.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -1 and 2- for the radiator fan.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts to the left and right -arrows - and push the radiator bracket with the radiator toward the front.

Courtesy of AUDI OF AMERICA, LLC

-- Push the left and right locking latches for the fan shroud at the same time in direction of -arrow- and lift the fan shroud upward from the radiator and remove from downward.