LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> A7 Quattro Premium >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING

Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING

Procedure 

GWWA10-12232Courtesy of AUDI OF AMERICA, LLC

-- Remove the right cover -1- toward the rear in direction of -arrows- and remove.

All additional procedures are described. Refer to ENGINE COOLANT TEMPERATURE SENSOR -G62-, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals