After-Run Coolant Pump -V51-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
• Used coolant cannot be used again.

-- If removed, install the Oxygen Sensor 1 After Catalytic Converter -GX7-. Refer to HEATED OXYGEN SENSOR, REMOVING AND INSTALLING .

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to Coolant, Filling .