LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> A7 Quattro Premium >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Small Right Rear Coolant Pipe, Removing And Installing, 2.9L Engine >> Removing

Small Right Rear Coolant Pipe, Removing And Installing, 2.9L Engine: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Install the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Vehicles without Particulate Filter:

GWWA26-11921Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw-type clamp -1- and push the catalytic converter slightly to the side.

Vehicles with a Particulate Filter:

-- Remove the right catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, 2.9L ENGINE WITH PARTICULATE FILTER .

Continuation for All:

GWWA19-12742Courtesy of AUDI OF AMERICA, LLC

-- Lift the clamp -2- and remove the coolant hose.

-- Remove the bolts -arrows- and the coolant pipe -1-.