Right Coolant Pipe On Engine, Removing And Installing: Removing

-- Remove the right front wheel.

-- Remove the right front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the right subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .

-- Remove the right drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .

-- Remove the right drive axle from the transmission. Refer to DRIVE AXLE, REMOVING AND INSTALLING .

-- Place the Shop Crane - Drip Tray :VAS6208  underneath.

Fig 1: Right Coolant Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.

-- Loosen the hose clamps -1 and 4- and remove the right coolant pipe -3-. (Shown with subframe removed.)